The difference between a high and low rate of fuel consumption can be achieved through efficient driving. Efficient driving is the modern and perfect way to arrive at any destination faster and safer.
Tips necessary to achieve efficient driving.
Regularly check the tyre pressure.
Low tyre pressure is not only a high-risk driving but also leads to a higher consumption of fuel. The rolling resistance of the car requires a considerable amount of energy to overcome. The lower the tyre pressure, the more the rolling resistance, and the higher the fuel consumption. Low tyre pressure also affects the vehicle braking and handling capability.
Tyre pressure should be checked at least once every month. The vehicle manufacturers normally recommend different tyre pressures for driving a loaded and an unloaded vehicle. The different pressure levels are normally indicated on the car manual, on the door post or on the vehicles fuel filling cap. Electronic accessories can also be equipped to monitor tyre pressure.
Beware of the fuel consuming appliances.
When driving, it is important to note that money is spent whenever any extra energy is used in the car. Electrical gadgets depend on the electric energy converted during the fuel combustion process. Electrical appliances such as air conditioners, onboard car heaters and modern HiFi systems should be used considerably since they increase the level of fuel consumption.
Driving around bends on the road.
Driving around bends can increase fuel consumption if not done efficiently. Efficient driving around bends involves a careful consideration of the prevailing weather conditions, the nature of the bend, the suitability of the road and the speed at which one approaches the bend. Instead of changing to a lower gear, the speed should be altered by a simple manipulation of the brakes.
The use of brakes can further be limited by a prior anticipation of the bends during approach. A sudden application of the brakes to negotiate the bend, followed by a drastic higher engine revolution to achieve acceleration is not only a possible cause of an accident but also increases fuel consumption.
Without the right acceleration and correct brake application, travelling uphill can lead to a higher level of fuel consumption. The secret for efficient driving in a mountainous terrain is to drive at a constant speed, engine revolution of 1000 rpm, while having a full load, instead of the usual high gear with maximum application of pressure on the accelerator.
Switch off the engine when necessary.
Fuel is used whenever the car engine runs. Efficient driving involves switching off the engine when necessary. When you stop temporarily such as on pedestrian crossing, railway crossing, when at the stop of the traffic lights or when you take a short stop to wait for someone, it is necessary to switch off the engine to save on the fuel consumption.
For modern vehicles, switching on the engine upon resumption of the journey does not necessarily need the pressing of the accelerator pedal. This makes starting the engine harder, thus leading to an increase in the amount of fuel used. The cars engine management system is designed to enable a proper starting of the engine.
Consider the cars aerodynamic performance.
The aerodynamic quality of a car greatly determines its fuel saving capability. During manufacture, all cars are tested for their ability to withstand and perform within acceptable standards of aerodynamic capabilities. The quality is, however, altered by the addition of other accessories such as roof boxes and extra aerials on the cars.
Such accessories will increase the air resistance during motion, thus increasing the rate of fuel consumption. When not necessary, roof boxes should be avoided especially for long journeys. Driving with open windows also allows air currents inside the vehicle, thus increasing air resistance. This, in the long run, reduces the cars aerodynamic capability.
Maintain a steady driving speed.
Maintaining a steady driving speed, with a lower engine revolution saves a larger amount of fuel compared to driving at the same speed, but with very drastic application of brakes and irregular intervals of acceleration.
Efficient driving involves a smooth driving, with minimal stress on the vehicles performance, and an undisturbed cruising. It is advisable to use the cars cruise control for highway driving and driving in challenging traffic situations within the city. This will help achieve a smooth driving. For professional help you may wish to learn to drive efficiently in Glasgow.
Make use of onboard devices.
Modern cars are equipped with onboard computers and other devices that help monitor the fuel consumption patterns while driving. They indicate the average and actual fuel consumption levels, giving the driver a real-time feedback on the rate at which fuel is used.
Cruise control, on the other hand, enables the maintenance of a steady driving speed, and a more relaxed style of driving. The Revolution counter prevents the car from being driven at a speed that would otherwise be considered excessive, inefficient and dangerous.
Efficient driving is an important technique that should be avoided by drivers for both short and long journeys. The benefit of this kind of driving is that it improves the safety of both the driver and other road users, promotes environmental friendliness by reducing the rate of smoke emissions and saves on the cost of fuel.
The author does not allow comments to this entry